Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Number of Pins |
5 |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tape & Reel (TR) |
Series |
Automotive, AEC-Q100 |
JESD-609 Code |
e4 |
Feature |
Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Resistance |
70mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Power Dissipation |
285mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Base Part Number |
TPS2041 |
Pin Count |
5 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Operating Supply Voltage |
5.5V |
Number of Channels |
2 |
Interface |
On/Off |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Nominal Supply Current |
43μA |
Output Configuration |
High Side |
Output Current |
500mA |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
70μA |
Adjustable Threshold |
NO |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Min Input Voltage |
2.7V |
Max Input Voltage |
5.5V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
2.7V~5.5V |
Fault Protection |
Current Limiting (Fixed), Over Temperature, UVLO |
Rds On (Typ) |
70m Ω |
Height |
1.45mm |
Length |
2.9mm |
Width |
1.6mm |
Thickness |
1.2mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS2041BQDBVRQ1 Overview
It is packaged in the form of a Tape & Reel (TR).There is a SC-74A, SOT-753 package that includes it.Surface Mount is the mounting type of the LED driver.It owns the General Purpose switch type.To ensure reliable operation, set the temperature to -40°C~125°C TJ.In this LED driver, there are no outputs available.To operate, it needs a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.In terms of features, the LED driving board has Status Flag.It belongs to the TPS2041 family.It has a total of 5 terminations.The 5 pins are used for the operation of the system.It consists of 1 functions.High efficiency is possible at 3.3V supply voltage.It is mounted in the way of Surface Mount.A total of 5 pins are included in this LED driver.Currently, the LED driving board has 70mOhm resistance.The Automotive, AEC-Q100 series includes this electrical component.When this case is used, the output current is set to 500mA.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 2 channels available.When using this LED driving board, it is recommended that the supply voltage is set to 5.5V.The maximum input voltage of the LED driver is 5.5V volts.There is a minimum input voltage of 2.7V volts for this LED driver.For its operation, a maximum current requirement of 70μA is required.
TPS2041BQDBVRQ1 Features
Supplied from 3.3V
Resistance of 70mOhm
2 channels
TPS2041BQDBVRQ1 Applications
There are a lot of Texas Instruments TPS2041BQDBVRQ1 Power Switches ICs applications.
- Set-top-box
- Portable GPS
- Storage Drives
- Various applications equipped with buttons
- Hot Swaps
- Notebook PC
- USB Ports/Hubs
- Portable Music Players
- USB3.1 Power Delivery
- Set-Top Boxes