TPS2041CDBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 13.012431mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| ECCN Code | EAR99 |
| Resistance | 96mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | TPS2041 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Current | 500mA |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 2.2 ms |
| Switch Type | USB Switch |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 2.5 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Switching | MAKE-BEFORE-BREAK |
| Rds On (Typ) | 97m Ω |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2041CDBVT Overview
A Cut Tape (CT) is used to package it.There is a package for it in the SC-74A, SOT-753 package.Surface Mount is the mounting type of the LED driver.USB Switch is the type of switch owned by it.To ensure reliable operation, set the temperature to -40°C~125°C TJ.The LED driver has 1 outputs.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.Currently, the LED driving board is equipped with Load Discharge, Status Flag features.There is a TPS2041 family of things that it belongs to.5 pins are used for operation.In this case, it is mounted in the way of Surface Mount.96mOhm resistance is present in the lighting driver.When this is the case, the output current is set to 500mA.In this case, the analog IC is SPST.
TPS2041CDBVT Features
Resistance of 96mOhm
TPS2041CDBVT Applications
There are a lot of Texas Instruments TPS2041CDBVT Power Switches ICs applications.
- Solid-State Drives
- Low Voltage I/O System Power
- Smartphone and PDA
- Mobile Communication Devices
- USB Power Distribution
- Handheld Devices
- Telecom and Network Systems
- Wireless/Networking Cards
- Hot Swap
- Set-top-box
