TPS2041DG4
| Parameters | |
|---|---|
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS2041 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Current - Output (Max) | 500mA |
| Nominal Supply Current | 10μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
TPS2041DG4 Overview
The LED driver's packaged as a Tube.It is included in the package 8-SOIC (0.154, 3.90mm Width).A Surface Mount mounting is used for the LED driving board.General Purpose is the switch type that it owns.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.In this LED driver, there are no outputs available.Operation is based on Not Required supply voltage.It has a maximum output voltage of N-Channel volts.In terms of features, the LED driving board has Status Flag.It is a member of the TPS2041 family.In total, there are 8 terminations.The operation is performed through the 8 pins.It consists of 1 functions.In this case, the LED driving board can produce only 500mAV as its maximum output.It is possible to achieve a high level of efficiency with a supply voltage of 5V.Surface Mount is mounted in the way of this LED driving board.In total, it has 8 pins.The lighting driver is configured to have a maximum supply voltage of 5.5V (Vsup).To maintain a normal operation, the supply voltage (Vsup) must be maintained above 2.7V.In this lighting driver, ANALOG CIRCUIT is the analog IC.
TPS2041DG4 Features
Supplied from 5V
TPS2041DG4 Applications
There are a lot of Texas Instruments TPS2041DG4 Power Switches ICs applications.
- Solid-State Drives
- PC Cards
- Wearable Devices
- Handheld Devices
- Notebook and Tablet Computers
- Set-Top Boxes
- Portable Video Game Players
- Hot Swap
- Portable GPS Device
- Hot Swap
