TPS2041P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TPS2041 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 1.18W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Continuous Drain Current (ID) | 500mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Drain to Source Resistance | 135mOhm |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2041P Overview
The LED driver's packaged as a Tube.It is included in the package 8-DIP (0.300, 7.62mm).The lighting driver has the mounting type Through Hole.General Purpose is the switch type it owns.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.By default, it is set to output 1.A supply voltage of Not Required is required for it to operate.Voltage output is N-Channel volts at maximum.Status Flag features are available on the lighting driver.It is a member of the TPS2041 family.It contains 8 terminations.8 pins are used for operation.It consists of 1 functions.Using a voltage of 5V allows for high efficiency.Through Hole is mounted in the way of this lighting driver.8 pins are equipped with it.A maximum supply voltage of 5.5V is set in Vsup.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 2.7V.In this case, a digital IC is used, which is ANALOG CIRCUIT.
TPS2041P Features
Supplied from 5V
TPS2041P Applications
There are a lot of Texas Instruments TPS2041P Power Switches ICs applications.
- Solid-State Drives
- Notebook and Tablet Computers
- Hot Swaps
- Hot Swap
- Wireless Headsets
- Wearable Devices
- USB Protection
- USB Ports/Hubs
- Portable Devices
- Low Voltage I/O System Power
