Parameters |
Mount |
Through Hole |
Package / Case |
PDIP |
Number of Pins |
8 |
Weight |
440.409842mg |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Number of Terminations |
8 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Terminal Position |
DUAL |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Pin Count |
8 |
Number of Outputs |
1 |
Max Output Current |
500mA |
Temperature Grade |
INDUSTRIAL |
Interface |
On/Off |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
2.7V |
Analog IC - Other Type |
ANALOG CIRCUIT |
Output Configuration |
High Side |
Fault Protection |
Over Temperature |
Width |
7.62mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
TPS2041PE4 Overview
This is included in the PDIP package.The 8 terminations total to three.In this case, the device is located at terminal DUAL.The device consists of a total of 8 pins.High efficiency can be achieved when the supply voltage is 5V.During operation, 8 pins are used.In Through Hole direction, it is positioned.Hot-swappable device is possible to maintain stable operation at a maximum temperature of 85°C°C.Hot-swappable device maintains Hot-swappable devices reliabilHot-swappable devicey at a minimum working temperature of -40°C degrees Celsius.An analog IC, in this case ANALOG CIRCUIT, is used in this gadget.The default output is 1.A maximum voltage of 5.5VV can be supplied to it.Hot Swap can work wHot Swaph as low a supply voltage as feasible, such as 2.7VV.Consequently, 500mA is the maximum output current that can be achieved to meet the operation criteria.
TPS2041PE4 Features
The terminal position of 8
TPS2041PE4 Applications
There are a lot of Texas Instruments TPS2041PE4 hot swap controllers applications.
- Identify faulty boards
- Switch
- Industrial application
- Safe board insertion and extraction
- DC boost circuit
- Microcontrollers
- Automatic restart after load failure
- Redundant-array-of-independent-disk (RAID) storage
- ISDN system
- Power monitoring