TPS2042BDGN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Max Power Dissipation | 1.712W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2042 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2042BDGN Overview
Tube is the way it's packaged.It is included with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package as well.A Surface Mount mounting is used for the LED driving board.There is a General Purpose switch type associated with it.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.As a default, the output is set to 2.A voltage of Not Required is used to power it.A maximum output voltage of N-Channel volts can be achieved by this LED driver.A lighting driver with Status Flag features is available.This object belongs to the TPS2042 family.A total of 8 terminations have been found in it.In order to operate, 8 pins are used.It is important to note that the LED driving board has 1 functions.High efficiency is possible when the supply voltage is set to 3.3V.Surface Mount is mounted in the way of this lighting driver.A total of 8 pins are included in this LED driver.Lighting drivers with 70mOhm resistance are used.The output current is set to 500mA in this case.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.In total, there are 2 channels available.This LED driver can handle voltages up to 5.5V volts.A minimum input voltage of 2.7V volts is required for this LED driver.As well as producing UNDERVOLTAGE LOCKOUT, this LED driving board is capable of producing [1].It has a maximum supply current of 0.09mA.
TPS2042BDGN Features
Supplied from 3.3V
Resistance of 70mOhm
2 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2042BDGN Applications
There are a lot of Texas Instruments TPS2042BDGN Power Switches ICs applications.
- Notebook and Tablet Computers
- Handheld Devices
- USB Power Distribution
- Various applications equipped with buttons
- Low Voltage I/O System Power
- USB3.1 Power Delivery
- Solid State Drivers
- USB Ports/Hubs
- Mobile Communication Devices
- Portable GPS Device
