TPS2042BDGNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2042 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2042BDGNR Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).Package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad contains it.This lighting drivere has a mounting type of Surface Mount.There is a switch type of General Purpose.Ensure reliable operation by setting the temperature to -40°C~125°C TJ.The lighting driver has a total of 2 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum voltage of N-Channel volts is available from the output of this LED driver.The lighting driver has Status Flag features.The TPS2042 family contains this object.It contains 8 terminations.During operation, the 8 pins are used.As far as the lighting driver is concerned, there are 1 functions.In terms of output, the lighting driver can provide a maximum of 500mA V.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.In this case, it is mounted in the way of Surface Mount.It is equipped with a total of 8 pins.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.In total, there are 2 channels available.Input voltage is limited to 5.5V volts.As a minimum input voltage, it requires 2.7V volts.With the help of this lighting driver, UNDERVOLTAGE LOCKOUT can also be produced.It operates at a maximum supply current of 0.09mA.
TPS2042BDGNR Features
Supplied from 3.3V
2 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2042BDGNR Applications
There are a lot of Texas Instruments TPS2042BDGNR Power Switches ICs applications.
- Portable Devices
- Smart Phones, Feature Phones
- HDD and SSD
- Gaming
- Hot Swap
- HDD, SSD
- Hot Swaps
- Hard Disk Drives
- Solid State Drivers
- PDAs
