TPS2042BDGNRG4
| Parameters | |
|---|---|
| Rds On (Typ) | 70m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2042 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
TPS2042BDGNRG4 Overview
Tape & Reel (TR) is how it's packaged.Package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad contains it.This lighting drivere has a mounting type of Surface Mount.It owns the General Purpose switch type.To ensure reliable operation, set the temperature to -40°C~125°C TJ.In this LED driver, there are no outputs available.It uses a supply voltage of Not Required to operate.The maximum output voltage of this LED driver is N-Channel volts.Status Flag features are available on the lighting driver.It is part of the TPS2042 family of LED drivers.It contains 8 terminations.The 8 pins are used to operate the LED driver.As far as functions are concerned, the lighting driver has 1.In order to meet the operation criteria, the maximum output current drops to 500mA.High efficiency is possible when the supply voltage is set to 3.3V.It is positioned in the direction of Surface Mount.A total of 8 pins are included in this LED driver.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 2 channels to choose from.Through the use of this lighting driver, we can also produce UNDERVOLTAGE LOCKOUT.A maximum supply current of 0.09mA is available for operation.
TPS2042BDGNRG4 Features
Supplied from 3.3V
2 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2042BDGNRG4 Applications
There are a lot of Texas Instruments TPS2042BDGNRG4 Power Switches ICs applications.
- Mobile Communication Devices
- Wearable Devices
- USB Protection
- Portable GPS Device
- Wireless/Networking Cards
- Set-Top Boxes
- HDD and SSD
- Storage Drives
- PC Card Hot Swap
- Solid State Drivers
