TPS2042BDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Max Power Dissipation | 585.82mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2042 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2042BDR Overview
Tape & Reel (TR) is the way it's packaged.It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.A Surface Mount mounting is used for the LED driving board.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.The LED driver is equipped with 2 outputs.The LED driving board operates at Not Required volts.It has a maximum output voltage of N-Channel volts.This LED driving board is equipped with Status Flag features in order for it to be useful.It is a member of the TPS2042 family.In total, there are 8 terminations.The 8 pins are used for the operation of the system.The LED driving board has a total of 1 functions.The maximum output current drops to 500mA in order to meet the operation criteria.A supply voltage of 3.3V leads to high efficiency.As a result, it has a total of 8 pins.It has 70mOhm resistance.This case results in a 500mA output current.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.We currently have 2 channels available.A maximum input voltage of 5.5V volts can be applied to it.It requires 2.7V volts as the minimum input voltage.The LED driver can also be used to produce UNDERVOLTAGE LOCKOUT.For operation, it has a maximum supply current of 0.09mA.
TPS2042BDR Features
Supplied from 3.3V
Resistance of 70mOhm
2 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2042BDR Applications
There are a lot of Texas Instruments TPS2042BDR Power Switches ICs applications.
- Hot Swap
- Telecom and Network Systems
- Wireless Modem Data Cards
- Hot-Swap Systems
- Solid-State Drives
- Gaming
- Hot Swaps
- Portable Video Game Players
- Hot Swap
- Portable/Handheld Devices
