TPS2042BDRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2042 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2042BDRG4 Overview
The package is in the form of a Tape & Reel (TR).There is a package for it in the 8-SOIC (0.154, 3.90mm Width) package.The lighting driver is mounted in the Surface Mount position.There is a switch type of General Purpose.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.The LED driver has a total of 2 outputs.A supply voltage of Not Required is required for it to operate.A maximum voltage of N-Channel volts is available from the output of this LED driver.It is equipped with Status Flag features.It belongs to the family TPS2042.There are 8 terminations in it.In order to operate, 8 pins are used.It consists of 1 functions.The LED driver output is limited to 500mAV.With a supply voltage of 3.3V, high efficiency is possible.As a result, it has a total of 8 pins.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.We currently have 2 channels available.It has a maximum input voltage of 5.5V volts.A minimum input voltage of 4.5V volts is required for this LED driver.Using this LED driver, it is also possible to produce UNDERVOLTAGE LOCKOUT.0.09mA is the maximum operating current.
TPS2042BDRG4 Features
Supplied from 3.3V
2 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2042BDRG4 Applications
There are a lot of Texas Instruments TPS2042BDRG4 Power Switches ICs applications.
- USB Ports/Hubs
- Portable GPS Device
- Portable/Handheld Devices
- Hot Swap
- Set-Top Boxes
- Hot-Swap Systems
- USB Power Distribution
- Wireless Modem Data Cards
- Various applications equipped with buttons
- Wireless Headsets
