Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
72.603129mg |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tape & Reel (TR) |
Series |
Automotive, AEC-Q100 |
JESD-609 Code |
e4 |
Feature |
Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
UNDERVOLTAGE LOCKOUT |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Base Part Number |
TPS2042 |
Pin Count |
8 |
Number of Outputs |
2 |
Output Type |
N-Channel |
Max Output Current |
500mA |
Number of Channels |
1 |
Interface |
On/Off |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Adjustable Threshold |
NO |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Min Input Voltage |
2.7V |
Max Input Voltage |
5.5V |
Supply Current-Max (Isup) |
0.09mA |
Nominal Input Voltage |
5.5V |
Ratio - Input:Output |
1:2 |
Voltage - Load |
2.7V~5.5V |
Fault Protection |
Current Limiting (Fixed), Over Temperature, UVLO |
Rds On (Typ) |
70m Ω |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS2042BQDRQ1 Overview
It is packaged in the form of a Tape & Reel (TR).This package is included in 8-SOIC (0.154, 3.90mm Width).This lighting drivere has a mounting type of Surface Mount.The switch type of this switch is General Purpose.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.The LED driver has 2 outputs.The LED driving board operates with a supply voltage of Not Required.Voltage output is N-Channel volts at maximum.This LED driving board is equipped with Status Flag features in order for it to be useful.It is part of the TPS2042 family of LED drivers.A total of 8 terminations can be found in it.In order to operate, 8 pins are used.It consists of 1 functions.The maximum output current drops to 500mA in order to meet the operation criteria.With a supply voltage of 3.3V, high efficiency is possible.8 pins are connected to it in total.Electrical components such as this are included in the Automotive, AEC-Q100 series.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.We currently have 1 channels available.The maximum input voltage of the LED driver is 5.5V volts.As far as input voltage goes, it has a minimum of 2.7V volts.The LED driver can also be used to produce UNDERVOLTAGE LOCKOUT.A maximum supply current of 0.09mA is available for operation.
TPS2042BQDRQ1 Features
Supplied from 3.3V
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2042BQDRQ1 Applications
There are a lot of Texas Instruments TPS2042BQDRQ1 Power Switches ICs applications.
- Smartphone and PDA
- Low Voltage I/O System Power
- Smart Phones, Feature Phones
- Portable Music Players
- Storage Drives
- Solid-State Drives
- Notebook PC
- Hard Disk Drives
- Telecom and Network Systems
- USB Ports/Hubs