TPS2042P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS2042 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 1.18W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Continuous Drain Current (ID) | 500mA |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Drain to Source Resistance | 135mOhm |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2042P Overview
As you can see, it's packaged in the way of a Tube.The 8-DIP (0.300, 7.62mm) package contains it.The LED driver is mounted as Through Hole.General Purpose is the switch type it owns.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.The lighting driver is equipped with 2 outputs that can be used.Operation is based on Not Required supply voltage.The maximum output voltage is N-Channel volts.Currently, the LED driving board is equipped with Status Flag features.The TPS2042 family consists of this type.It contains 8 terminations.It is necessary to use the 8 pins in order to operate the LED driver.It consists of 1 functions.As a result, the maximum output current is reduced to 500mA in order to meet the operation requirements.High efficiency is possible when the supply voltage is set to 5V.The lighting driver is mounted in the direction of Through Hole.A total of 8 pins are present on it.The maximum supply voltage for this lighting driver is set to 5.5V (Vsup).The gadget uses an analog IC, which is ANALOG CIRCUIT in this case.
TPS2042P Features
Supplied from 5V
TPS2042P Applications
There are a lot of Texas Instruments TPS2042P Power Switches ICs applications.
- Gaming
- Smart Phones, Feature Phones
- USB Ports/Hubs
- Notebook PC
- Hot Swap
- HDD, SSD
- Storage Drives
- Hot-Swap Systems
- PC Cards
- Set-Top Boxes
