TPS2043AD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2043 |
| Pin Count | 16 |
| Number of Outputs | 3 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 3 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 1.12W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Continuous Drain Current (ID) | 500mA |
| Ratio - Input:Output | 1:2, 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Drain to Source Resistance | 135mOhm |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2043AD Overview
It is packaged in the manner of a Tube.Package 16-SOIC (0.154, 3.90mm Width) contains it.It has been mounted as Surface Mount on the LED driver.This switch is of type General Purpose.It is recommended to set the temperature to 0°C~125°C TJ in order to ensure reliable operation.In this LED driver, there are no outputs available.A voltage of Not Required is used to power it.A maximum output voltage of N-Channel volts can be achieved by this LED driver.There are Status Flag features available on the LED driving board.The TPS2043 family consists of this type.It contains 16 terminations.In order to operate, 16 pins are used.There are 1 functions of the LED driver.A supply voltage of 3.3V leads to high efficiency.The lighting driver is mounted in the direction of Surface Mount.In total, it has 16 pins.The lighting driver is configured to have a maximum supply voltage of 5.5V (Vsup).For normal operation, the supply voltage (Vsup) must be kept above 2.7V.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.In total, 3 channels are available.
TPS2043AD Features
Supplied from 3.3V
3 channels
TPS2043AD Applications
There are a lot of Texas Instruments TPS2043AD Power Switches ICs applications.
- Hot Swap
- Solid State Drivers
- USB Power Distribution
- Portable Devices
- Various applications equipped with buttons
- Wearable Devices
- PDAs
- Telecom and Network Systems
- Hot Swaps
- Low Voltage I/O System Power
