TPS2043ADG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2043 |
| Pin Count | 16 |
| Number of Outputs | 3 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 3 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:2, 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2043ADG4 Overview
Tube is the way it's packaged.The 16-SOIC (0.154, 3.90mm Width) package includes it.It has been mounted as Surface Mount on the LED driver.A General Purpose switch type is owned by it.The temperature should be set to 0°C~125°C TJ to ensure reliable functioning.The lighting driver has a total of 3 outputs that are available for use.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.Features of the lighting driver are Status Flag.It comes under the family of TPS2043.As a result, there are 16 terminations.For operation, 16 pins are used.It is important to note that the LED driving board has 1 functions.The lighting driver's maximum output is 500mAV.Supply voltages of 3.3V allow for high efficiency.The lighting driver is mounted in the direction of Surface Mount.The LED driving board is equipped with a total of 16 pins.The maximum supply voltage is set to 5.5V.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 2.7V.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.We currently have 3 channels available.
TPS2043ADG4 Features
Supplied from 3.3V
3 channels
TPS2043ADG4 Applications
There are a lot of Texas Instruments TPS2043ADG4 Power Switches ICs applications.
- Low Voltage I/O System Power
- Portable/Handheld Devices
- Handheld Devices
- Set-top-box
- USB Protection
- Portable Music Players
- Hot Swaps
- Set-Top Boxes
- PC Card Hot Swap
- Telecom and Network Systems
