TPS2043BD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Max Power Dissipation | 898.47mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2043 |
| Pin Count | 16 |
| Number of Outputs | 3 |
| Output Voltage | 6V |
| Output Type | N-Channel |
| Number of Channels | 3 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 898mW |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.11mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2, 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2043BD Overview
Tube is how it's packaged.This package is included in 16-SOIC (0.154, 3.90mm Width).This LED driving board is mounted using the mounting type Surface Mount.It owns the General Purpose switch type.It is recommended to set the temperature to -40°C~125°C TJ in order to ensure reliable operation.The LED driver is equipped with 3 outputs.Operation is based on a supply voltage of Not Required.Voltage output is N-Channel volts at maximum.The lighting driver has Status Flag features.This object belongs to the TPS2043 family.It consists of 16 terminations in total.The operation is carried out using the 16 pins.The LED driving board has a total of 1 functions.Using a voltage of 3.3V allows for high efficiency.A total of 16 pins are included in this LED driver.Lighting drivers with 70mOhm resistance are used.It is set to 500mA in this case.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.There are a total of 3 channels to choose from.As far as input voltage goes, its maximum is 5.5V volts.As a minimum input voltage, it requires 2.7V volts.With this LED driver, UNDERVOLTAGE LOCKOUT can also be produced.It operates at a maximum supply current of 0.11mA.
TPS2043BD Features
Supplied from 3.3V
Resistance of 70mOhm
3 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2043BD Applications
There are a lot of Texas Instruments TPS2043BD Power Switches ICs applications.
- Hot-Swap Systems
- USB Protection
- Handheld Devices
- Telecom and Network Systems
- Smartphone and PDA
- USB3.1 Power Delivery
- Portable Video Game Players
- Portable/Handheld Devices
- HDD and SSD
- Hard Disk Drives
