TPS2043BDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2043 |
| Pin Count | 16 |
| Number of Outputs | 3 |
| Output Type | N-Channel |
| Number of Channels | 3 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.11mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2, 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2043BDR Overview
The package is in the form of a Tape & Reel (TR).In the 16-SOIC (0.154, 3.90mm Width) package, it is included.A Surface Mount mounting is used for the LED driving board.General Purpose is the switch type it owns.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.The lighting driver has a total of 3 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.It produces a maximum output voltage of N-Channel volts at its maximum output.There are Status Flag features available on the LED driving board.It comes under the family of TPS2043.A total of 16 terminations have been recorded.During operation, the 16 pins are used.As far as the lighting driver is concerned, there are 1 functions.In this case, the LED driving board can produce only 500mAV as its maximum output.The supply voltage of 3.3V is conducive to high efficiency.In total, it has 16 pins.It is self-contained in an econtainer with a capacity of Power Management Circuits.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.We currently have 3 channels available.The maximum input voltage is 5.5V volts.As a minimum input voltage, it requires 2.7V volts.As well as producing UNDERVOLTAGE LOCKOUT, this LED driving board is capable of producing [1].The maximum supply current for the LED driver is 0.11mA when it is operating.
TPS2043BDR Features
Supplied from 3.3V
3 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2043BDR Applications
There are a lot of Texas Instruments TPS2043BDR Power Switches ICs applications.
- Hard Disk Drives
- Telecom and Network Systems
- Mobile Communication Devices
- Hot Swap
- HDD, SSD
- PC Cards
- Storage (HDDs, SSDs)
- Various applications equipped with buttons
- Handheld Devices
- Portable/Handheld Devices
