TPS2043BDRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2043 |
| Pin Count | 16 |
| Number of Outputs | 3 |
| Output Type | N-Channel |
| Number of Channels | 3 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.11mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2, 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2043BDRG4 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).The 16-SOIC (0.154, 3.90mm Width) package contains it.It has been mounted as Surface Mount on the LED driver.There is a switch type of General Purpose.To ensure reliable operation, set the temperature to -40°C~125°C TJ.It is possible to use 3 outputs in the lighting driver.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.A lighting driver with Status Flag features is available.It belongs to the TPS2043 family.It contains 16 terminations.16 pins are used for operation.The LED driver has 1 functions.500mAV is the maximum output of the LED driver.High efficiency is possible at 3.3V supply voltage.There are 16 pins in total on this board.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.We currently have 3 channels available.Input voltage is limited to 5.5V volts.It has a 2.7V volt minimum input voltage.The LED driver can also be used to produce UNDERVOLTAGE LOCKOUT.For operation, it has a maximum supply current of 0.11mA.
TPS2043BDRG4 Features
Supplied from 3.3V
3 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2043BDRG4 Applications
There are a lot of Texas Instruments TPS2043BDRG4 Power Switches ICs applications.
- USB Power Distribution
- Storage (HDDs, SSDs)
- Notebook and Tablet Computers
- Various applications equipped with buttons
- PC Card Hot Swap
- PC Cards
- HDD, SSD
- Portable GPS
- Portable Devices
- Wearable Devices
