TPS2043DR
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2043 |
| Pin Count | 16 |
| Number of Outputs | 3 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 3 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 725mW |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Continuous Drain Current (ID) | 500mA |
| Ratio - Input:Output | 1:2, 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Drain to Source Resistance | 135mOhm |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 155.100241mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
TPS2043DR Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).There is a package for it in the 16-SOIC (0.154, 3.90mm Width) package.This LED driving board is mounted using the mounting type Surface Mount.It owns the General Purpose switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.The LED driver is equipped with 3 outputs.To operate, it needs a supply voltage of Not Required.It has a maximum output voltage of N-Channel volts.A lighting driver with Status Flag features is available.It is part of the TPS2043 family of LED drivers.It has a total of 16 terminations.The operation is carried out using the 16 pins.It is important to note that the LED driving board has 1 functions.The maximum output current drops to 500mA in order to meet the operation criteria.High efficiency is possible when the supply voltage is set to 3.3V.Surface Mount is mounted in the way.In total, it has 16 pins.A maximum supply voltage of 5.5V is set in Vsup.Normal operation requires Vsup above 2.7V.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.You can select from 3 channels.
TPS2043DR Features
Supplied from 3.3V
3 channels
TPS2043DR Applications
There are a lot of Texas Instruments TPS2043DR Power Switches ICs applications.
- Portable/Handheld Devices
- Wireless/Networking Cards
- Set-top-box
- Wireless Modem Data Cards
- Hot-Swap Systems
- Portable GPS
- Hard Disk Drives
- Gaming
- Mobile Communication Devices
- Solid-State Drives
