TPS2044ADR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2044 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 4 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 2 x 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2044ADR Overview
It is packaged in the manner of a Tape & Reel (TR).The 16-SOIC (0.154, 3.90mm Width) package includes it.In this case, the LED driving board is mounted as Surface Mount.There is a switch type of General Purpose.To ensure reliable operation, set the temperature to 0°C~125°C TJ.It is possible to use 4 outputs in the lighting driver.In order to operate, it requires a voltage supply of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.There are Status Flag features available on the LED driving board.It is a member of the TPS2044 family.There are 16 terminations in it.It is necessary to use the 16 pins in order to operate the LED driver.The LED driver has 1 functions.Its maximum output voltage is 500mAV.As long as the supply voltage is 3.3V, high efficiency can be achieved.As a result, it is mounted in the manner of Surface Mount.The LED driver has a total of 16 pins.A maximum supply voltage of 5.5V is set in Vsup.For normal operation, the supply voltage (Vsup) must be kept above 2.7V.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.A total of 4 channels are available for you to choose from.
TPS2044ADR Features
Supplied from 3.3V
4 channels
TPS2044ADR Applications
There are a lot of Texas Instruments TPS2044ADR Power Switches ICs applications.
- Low Voltage I/O System Power
- Various applications equipped with buttons
- Wireless Headsets
- PDAs
- Storage (HDDs, SSDs)
- PC Cards
- Hot Swap
- Solid-State Drives
- Mobile Communication Devices
- Notebook PC
