TPS2044BDG4
| Parameters | |
|---|---|
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 2 x 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Max Power Dissipation | 898.47mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2044 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Number of Channels | 4 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
TPS2044BDG4 Overview
The package is in the form of a Tube.The 16-SOIC (0.154, 3.90mm Width) package contains it.In this case, the LED driving board is mounted as Surface Mount.This switch is of type General Purpose.Keeping the temperature at -40°C~125°C TJ ensures reliable operation.The lighting driver has a total of 4 outputs that are available for use.It uses a supply voltage of Not Required to operate.It produces a maximum output voltage of N-Channel volts at its maximum output.Features of the lighting driver are Status Flag.It is part of the TPS2044 family of LED drivers.The termination count is 16.For operation, 16 pins are used.The LED driver has 1 functions.This LED driver has a maximum output of 500mAV.With a supply voltage of 3.3V, high efficiency is possible.A total of 16 pins are present on it.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.The total number of channels is 4.A maximum input voltage of 5.5V volts can be applied to it.It has a 2.7V volt minimum input voltage.Using this LED driver, it is also possible to produce UNDERVOLTAGE LOCKOUT.
TPS2044BDG4 Features
Supplied from 3.3V
4 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2044BDG4 Applications
There are a lot of Texas Instruments TPS2044BDG4 Power Switches ICs applications.
- Set-top-box
- PC Card Hot Swap
- Portable GPS
- HDD, SSD
- Mobile Communication Devices
- Wireless/Networking Cards
- USB Ports/Hubs
- Portable/Handheld Devices
- Hot Swap
- Various applications equipped with buttons
