TPS2044BDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Manufacturer Package Identifier | D-(R-PDSO-G16) |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Max Power Dissipation | 898.47mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2044 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Number of Channels | 4 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 2 x 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2044BDR Overview
The package is in the form of a Tape & Reel (TR).It is included in the package 16-SOIC (0.154, 3.90mm Width).In this case, the LED driving board is mounted as Surface Mount.There is a switch type of General Purpose.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.In this LED driver, there are no outputs available.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts can be obtained with this LED driver.In terms of features, the LED driving board has Status Flag.It is a member of the TPS2044 family.The termination count is 16.It is necessary to use the 16 pins in order to operate the LED driver.It contains 1 functions.From the lighting driver, there is a maximum output of 500mAV.A supply voltage of 3.3V leads to high efficiency.16 pins are equipped with it.Lighting drivers with 70mOhm resistance are used.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.You can select from 4 channels.As far as input voltage goes, its maximum is 5.5V volts.As far as input voltage goes, it has a minimum of 2.7V volts.Using this LED driver, it is also possible to produce UNDERVOLTAGE LOCKOUT.
TPS2044BDR Features
Supplied from 3.3V
Resistance of 70mOhm
4 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2044BDR Applications
There are a lot of Texas Instruments TPS2044BDR Power Switches ICs applications.
- Notebook PC
- Set-top-box
- USB Ports/Hubs
- HDD, SSD
- Smartphone and PDA
- Low Voltage I/O System Power
- Notebook and Tablet Computers
- Hot Swap
- HDD and SSD
- Portable Devices
