TPS2044BDRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2044 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Number of Channels | 4 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 2 x 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2044BDRG4 Overview
Tape & Reel (TR) is the way it's packaged.There is a package for it in the 16-SOIC (0.154, 3.90mm Width) package.This LED driving board is mounted using the mounting type Surface Mount.A General Purpose switch type is owned by it.To ensure reliable operation, the temperature should be set to -40°C~125°C TJ.It is possible to use 4 outputs in the lighting driver.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.Status Flag features are available on the lighting driver.I believe it belongs to the TPS2044 family.It consists of 16 terminations in total.The 16 pins are used for the operation of the system.It contains 1 functions.This lighting driver is capable of delivering a maximum output of 500mA volts.Using a voltage of 3.3V allows for high efficiency.It is equipped with a total of 16 pins.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.There are a total of 4 channels to choose from.It has a maximum input voltage of 5.5V volts.As far as input voltage goes, it has a minimum of 2.7V volts.With the help of this lighting driver, UNDERVOLTAGE LOCKOUT can also be produced.
TPS2044BDRG4 Features
Supplied from 3.3V
4 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2044BDRG4 Applications
There are a lot of Texas Instruments TPS2044BDRG4 Power Switches ICs applications.
- Storage (HDDs, SSDs)
- USB Power Distribution
- Hot Swap
- Gaming
- Portable GPS
- USB Power Distribution
- USB3.1 Power Delivery
- USB Protection
- PDAs
- Hot-Swap Systems
