TPS2044D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2044 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Output Voltage | 6.3V |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 4 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 725mW |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Continuous Drain Current (ID) | 500mA |
| Ratio - Input:Output | 2 x 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Drain to Source Resistance | 135mOhm |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2044D Overview
As a result, it is packaged in the form of a Tube.There is a package for it in the 16-SOIC (0.154, 3.90mm Width) package.A Surface Mount mounting is used for the LED driving board.There is a switch type of General Purpose.Ensure reliable operation by setting the temperature to -40°C~125°C TJ.As a default, the output is set to 4.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts has been specified.Currently, the LED driving board is equipped with Status Flag features.I believe it belongs to the TPS2044 family.In total, there are 16 terminations.During operation, the 16 pins are used.As far as the lighting driver is concerned, there are 4 functions.To comply with the operation criteria, the maximum output current is reduced to 500mA.The supply voltage of 3.3V is conducive to high efficiency.As a result, it is mounted in the manner of Surface Mount.16 pins are equipped with it.The output current is set to 500mA in this case.In this LED driver, the maximum supply voltage is configured to be 5.5V (Vsup).In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 2.7V.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.We offer 4 channels in total.
TPS2044D Features
Supplied from 3.3V
4 channels
TPS2044D Applications
There are a lot of Texas Instruments TPS2044D Power Switches ICs applications.
- Hard Disk Drives
- Set-top-box
- Solid-State Drives
- Wireless Modem Data Cards
- Low Voltage I/O System Power
- Telecom and Network Systems
- Wireless Headsets
- Solid State Drivers
- Notebook PC
- Portable Music Players
