TPS2044DRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2044 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 4 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 2 x 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2044DRG4 Overview
Tape & Reel (TR) is the way it's packaged.There is a package for it in the 16-SOIC (0.154, 3.90mm Width) package.Surface Mount is the mounting type of the LED driver.It owns the General Purpose switch type.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.By default, it is set to output 4.The LED driving board operates at Not Required volts.Voltage output is N-Channel volts at maximum.Features of the lighting driver are Status Flag.It is part of the TPS2044 family of LED drivers.In total, there are 16 terminations.It is necessary to use the 16 pins in order to operate the LED driver.There are 4 functions of the LED driver.This LED driver has a maximum output of 500mAV.High efficiency is possible when the supply voltage is set to 3.3V.The lighting driver is mounted in the way of Surface Mount.This LED driver is equipped with a total of 16 pins.The maximum supply voltage is set to 5.5V.In order to operate normally, the supply voltage (Vsup) must remain above 2.7V.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.In total, 4 channels are available.
TPS2044DRG4 Features
Supplied from 3.3V
4 channels
TPS2044DRG4 Applications
There are a lot of Texas Instruments TPS2044DRG4 Power Switches ICs applications.
- PC Cards
- Hard Disk Drives
- Wireless Headsets
- Wearable Devices
- Portable Devices
- USB Ports/Hubs
- Portable/Handheld Devices
- Hot-Swap Systems
- Smart Phones, Feature Phones
- Hot Swap
