TPS2045D
| Parameters | |
|---|---|
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Drain to Source Resistance | 135mOhm |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2045 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 725mW |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Continuous Drain Current (ID) | 250mA |
TPS2045D Overview
As you can see, it's packaged in the way of a Tube.It's included in the 8-SOIC (0.154, 3.90mm Width) package.The lighting driver is mounted in the Surface Mount position.The switch type of this switch is General Purpose.Ensure reliable operation by setting the temperature to -40°C~125°C TJ.It is possible to use 1 outputs in the lighting driver.Operation is based on a supply voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.Status Flag features are available on the lighting driver.As you can see, it comes from the TPS2045 family.As a result, there are 8 terminations.The operation is performed through the 8 pins.There are 1 functions of the LED driver.Supply voltages of 3.3V allow for high efficiency.As a result, it is mounted in the manner of Surface Mount.8 pins are connected to it in total.This LED driver is configured to have a maximum supply voltage of 5.5V (Vsup).The supply voltage (Vsup) should be kept above 2.7V for normal operation.In this LED driving board, the analog IC POWER SUPPLY SUPPORT CIRCUIT is employed.The total number of channels is 1.
TPS2045D Features
Supplied from 3.3V
1 channels
TPS2045D Applications
There are a lot of Texas Instruments TPS2045D Power Switches ICs applications.
- HDD, SSD
- Portable Music Players
- Wireless Modem Data Cards
- Hot-Swap Systems
- Telecom and Network Systems
- USB Power Distribution
- Hot Swap
- Hard Disk Drives
- Wireless/Networking Cards
- USB3.1 Power Delivery
