TPS2045P
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2045 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 1.18W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Continuous Drain Current (ID) | 250mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Drain to Source Resistance | 135mOhm |
| Length | 9.59mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2045P Overview
As a result, it is packaged in the form of a Tube.In the 8-DIP (0.300, 7.62mm) package, it is included.The lighting driver has the mounting type Through Hole.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.It is possible to use 1 outputs in the lighting driver.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.As far as features are concerned, the LED driving board has Status Flag.It comes under the family of TPS2045.A total of 8 terminations have been recorded.For operation, we use the 8 pins.It contains 1 functions.It is possible to obtain high efficiency with a supply voltage of 3.3V.Through Hole is mounted in the way.This LED driver is equipped with a total of 8 pins.The maximum supply voltage for this lighting driver is set to 5.5V (Vsup).Normal operation requires a voltage above 2.7V for the supply voltage.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.We offer 1 channels in total.
TPS2045P Features
Supplied from 3.3V
1 channels
TPS2045P Applications
There are a lot of Texas Instruments TPS2045P Power Switches ICs applications.
- Hot-Swap Systems
- Portable/Handheld Devices
- USB Ports/Hubs
- Set-Top Boxes
- Hot Swaps
- Low Voltage I/O System Power
- Portable Music Players
- USB Power Distribution
- Wireless/Networking Cards
- Wearable Devices
