Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
72.603129mg |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tube |
JESD-609 Code |
e4 |
Feature |
Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
70mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
UNDERVOLTAGE LOCKOUT |
Subcategory |
Power Management Circuits |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Base Part Number |
TPS2046 |
Pin Count |
8 |
Number of Outputs |
2 |
Output Type |
N-Channel |
Max Output Current |
250mA |
Power Supplies |
3/5V |
Number of Channels |
2 |
Interface |
On/Off |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Nominal Supply Current |
50μA |
Output Configuration |
High Side |
Output Current |
250mA |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Adjustable Threshold |
NO |
Input Type |
Non-Inverting |
Turn On Delay Time |
3 ms |
Switch Type |
General Purpose |
Min Input Voltage |
2.7V |
Number of Inputs |
1 |
Max Input Voltage |
5.5V |
Supply Current-Max (Isup) |
0.09mA |
Nominal Input Voltage |
5.5V |
Turn-Off Delay Time |
10 ms |
Ratio - Input:Output |
1:2 |
Voltage - Load |
2.7V~5.5V |
Fault Protection |
Current Limiting (Fixed), Over Temperature, UVLO |
Rds On (Typ) |
70m Ω |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS2046BD Overview
A Tube is used to package it.This package is included in 8-SOIC (0.154, 3.90mm Width).The mounting type of the LED driver is Surface Mount.The switch type is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~125°C TJ.There is a default setting of 2 for output.A voltage of Not Required is used to power it.There is a maximum output voltage of N-Channel volts.It has a total of Status Flag features.This object belongs to the TPS2046 family.A total of 8 terminations have been recorded.It is necessary to use the 8 pins in order to operate the LED driver.It consists of 1 functions.Maximum output current falls to 250mA when operation criteria are met.As long as the supply voltage is 3.3V, high efficiency can be achieved.The LED driving board is equipped with a total of 8 pins.In this LED driving board, there is 70mOhm resistance.The output current is set to 250mA in this case.A container with a capacity of Power Management Circuits contains this self-contained lighting driver.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.In total, 2 channels are available.A 3/5V power supply is used by the part.This LED driver can handle voltages up to 5.5V volts.A voltage of 2.7V volts is the minimum input voltage.In addition, UNDERVOLTAGE LOCKOUT can be produced using this LED driving board.0.09mA is the maximum operating current.It has 1 inputs.
TPS2046BD Features
Supplied from 3.3V
Resistance of 70mOhm
2 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2046BD Applications
There are a lot of Texas Instruments TPS2046BD Power Switches ICs applications.
- Portable/Handheld Devices
- Wireless Modem Data Cards
- Portable GPS
- Hard Disk Drives
- USB Ports/Hubs
- Hot Swap
- Hot-Swap Systems
- PC Card Hot Swap
- Wireless/Networking Cards
- Portable GPS Device