TPS2047ADRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2047 |
| Pin Count | 16 |
| Number of Outputs | 3 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 3 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 250mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:2, 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS2047ADRG4 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It's included in the 16-SOIC (0.154, 3.90mm Width) package.In this case, the LED driving board is mounted as Surface Mount.There is a General Purpose switch type associated with it.It is best to set the temperature to 0°C~125°C TJ to ensure reliable operation.The lighting driver is equipped with 3 outputs that can be used.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.This LED driving board is equipped with Status Flag features in order for it to be useful.It belongs to the family TPS2047.In total, there are 16 terminations.It is necessary to use the 16 pins in order to operate the LED driver.Currently, there are 1 functions associated with the lighting driver.This LED driver has a maximum output of 250mAV.It is possible to obtain high efficiency with a supply voltage of 3.3V.Surface Mount is mounted in the way.The LED driving board is equipped with a total of 16 pins.The maximum supply voltage for this LED driver is 5.5V (Vsup).Normal operation requires a voltage above 2.7V for the supply voltage.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.A total of 3 channels are available for you to choose from.
TPS2047ADRG4 Features
Supplied from 3.3V
3 channels
TPS2047ADRG4 Applications
There are a lot of Texas Instruments TPS2047ADRG4 Power Switches ICs applications.
- Hard Disk Drives
- Solid-State Drives
- HDD, SSD
- Portable GPS
- Hot Swaps
- USB Ports/Hubs
- PC Card Hot Swap
- Portable Devices
- Wireless Modem Data Cards
- Portable/Handheld Devices
