TPS2047BD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2047 |
| Pin Count | 16 |
| Number of Outputs | 3 |
| Output Type | N-Channel |
| Max Output Current | 250mA |
| Number of Channels | 3 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.11mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2, 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2047BD Overview
It's?packaged?in?the way?of?a?Tube.This package is included in 16-SOIC (0.154, 3.90mm Width).Surface Mount is the mounting type of the LED driver.General Purpose is the type of switch owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.The LED driver has a total of 3 outputs.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts can be achieved by this LED driver.As far as features are concerned, the LED driving board has Status Flag.The TPS2047 family contains this object.It contains 16 terminations.The operation is performed through the 16 pins.There are 1 functions of the LED driver.It is necessary to reduce the maximum output current to 250mA to meet the operation criteria.High efficiency is possible when the supply voltage is set to 3.3V.A total of 16 pins are included in this LED driver.When this is the case, the output current is set to 250mA.A container with a capacity of Power Management Circuits contains this self-contained lighting driver.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.A total of 3 channels are available for you to choose from.Voltage input is limited to 5.5V volts.There is a minimum input voltage of 2.7V volts.By using this lighting driver, it is also possible to produce UNDERVOLTAGE LOCKOUT.It operates at a maximum supply current of 0.11mA.It has 2 inputs.
TPS2047BD Features
Supplied from 3.3V
3 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2047BD Applications
There are a lot of Texas Instruments TPS2047BD Power Switches ICs applications.
- Hard Disk Drives
- USB3.1 Power Delivery
- Wireless Headsets
- Hot Swaps
- Solid State Drivers
- Portable/Handheld Devices
- Telecom and Network Systems
- USB Protection
- Portable Video Game Players
- USB Power Distribution
