TPS2047BDR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2047 |
| Pin Count | 16 |
| Number of Outputs | 3 |
| Output Type | N-Channel |
| Max Output Current | 250mA |
| Number of Channels | 3 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.11mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2, 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS2047BDR Overview
Tape & Reel (TR) is the way it's packaged.This file is included in package 16-SOIC (0.154, 3.90mm Width).Mounting type Surface Mount is selected for the LED driving board.General Purpose is the switch type it owns.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.It is possible to use 3 outputs in the lighting driver.To operate, it needs a supply voltage of Not Required.The maximum output voltage is N-Channel volts.As far as features are concerned, the LED driving board has Status Flag.It comes under the family of TPS2047.In total, there are 16 terminations.For operation, we use the 16 pins.As far as the lighting driver is concerned, there are 1 functions.In order to meet the operation criteria, the maximum output current drops to 250mA.Using a voltage of 3.3V allows for high efficiency.In total, it has 16 pins.In this case, the output current will be set to 250mA.Self-contained LED driver with Power Management Circuits capacity in an econtainer.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 3 channels available.Input voltage is limited to 5.5V volts.A voltage of 2.7V volts is the minimum input voltage.With this LED driver, UNDERVOLTAGE LOCKOUT can also be produced.A maximum supply current of 0.11mA is available for operation.The lighting driver is equipped with 2 inputs.
TPS2047BDR Features
Supplied from 3.3V
3 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2047BDR Applications
There are a lot of Texas Instruments TPS2047BDR Power Switches ICs applications.
- Mobile Communication Devices
- Solid-State Drives
- HDD, SSD
- Gaming
- USB Power Distribution
- Portable Music Players
- Wireless Modem Data Cards
- Hot Swaps
- Telecom and Network Systems
- PC Card Hot Swap
