TPS2047BDRG4
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2047 |
| Pin Count | 16 |
| Number of Outputs | 3 |
| Output Type | N-Channel |
| Max Output Current | 250mA |
| Number of Channels | 3 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.11mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2, 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS2047BDRG4 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).It is included in the package 16-SOIC (0.154, 3.90mm Width).A Surface Mount mounting is used for the LED driving board.There is a switch type of General Purpose.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.The LED driver has a total of 3 outputs.Operation is based on a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.As far as features are concerned, the LED driving board has Status Flag.It belongs to the family TPS2047.There are 16 terminations in it.During operation, the 16 pins are used.Currently, the lighting driver has a total of 1 functions.The maximum output current must drop to 250mA to meet the operation criteria.As long as the supply voltage is 3.3V, high efficiency can be achieved.A total of 16 pins are included in this LED driver.In this case, the output current will be set to 250mA.A container with a capacity of Power Management Circuits contains this self-contained lighting driver.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.You can select from 3 channels.It has a maximum input voltage of 5.5V volts.The minimum input voltage is 2.7V volts.The LED driver can also be used to produce UNDERVOLTAGE LOCKOUT.The maximum supply current for the LED driver is 0.11mA when it is operating.2 inputs are available.
TPS2047BDRG4 Features
Supplied from 3.3V
3 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2047BDRG4 Applications
There are a lot of Texas Instruments TPS2047BDRG4 Power Switches ICs applications.
- Wearable Devices
- HDD and SSD
- Portable GPS Device
- USB3.1 Power Delivery
- Set-Top Boxes
- PC Card Hot Swap
- Wireless Headsets
- USB Protection
- Portable Devices
- Notebook and Tablet Computers
