TPS2048AD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2048 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Number of Channels | 4 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 1.12W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Continuous Drain Current (ID) | 250mA |
| Ratio - Input:Output | 2 x 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Drain to Source Resistance | 100mOhm |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2048AD Overview
The LED driver's packaged as a Tube.The 16-SOIC (0.154, 3.90mm Width) package contains it.The LED driver is mounted as Surface Mount.This switch is of type General Purpose.It is recommended that the temperature be set to 0°C~125°C TJ for reliable operation.The LED driver has 4 outputs.The LED driving board operates at Not Required volts.It produces a maximum output voltage of N-Channel volts at its maximum output.In terms of features, the LED driving board has Status Flag.The TPS2048 family contains this object.It consists of 16 terminations in total.For operation, 16 pins are used.It is important to note that the LED driving board has 1 functions.Using a voltage of 3.3V allows for high efficiency.This LED driver is equipped with a total of 16 pins.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.To choose from, there are 4 channels.The maximum input voltage of the LED driver is 5.5V volts.It has a 2.7V volt minimum input voltage.
TPS2048AD Features
Supplied from 3.3V
4 channels
TPS2048AD Applications
There are a lot of Texas Instruments TPS2048AD Power Switches ICs applications.
- Portable GPS
- Portable GPS Device
- Various applications equipped with buttons
- Notebook PC
- USB Ports/Hubs
- Wearable Devices
- Solid-State Drives
- Handheld Devices
- Telecom and Network Systems
- Notebook and Tablet Computers
