TPS2048ADRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2048 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Number of Channels | 4 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 250mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 2 x 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2048ADRG4 Overview
It is package in Tape & Reel (TR) case.The 16-SOIC (0.154, 3.90mm Width) package contains it.A Surface Mount mounting is used for the LED driving board.General Purpose is the switch type it owns.It is recommended to set the temperature to 0°C~125°C TJ in order to ensure reliable operation.By default, it is set to output 4.The LED driving board is powered by a voltage of Not Required.The maximum output voltage is N-Channel volts.A lighting driver with Status Flag features is available.The TPS2048 family consists of this type.A total of 16 terminations can be found in it.In order to operate, 16 pins are used.As far as the lighting driver is concerned, there are 1 functions.The LED driver output is limited to 250mAV.With a supply voltage of 3.3V, high efficiency is possible.It is equipped with a total of 16 pins.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.The total number of channels is 4.Input voltage is limited to 5.5V volts.There is a minimum input voltage of 2.7V volts for this LED driver.
TPS2048ADRG4 Features
Supplied from 3.3V
4 channels
TPS2048ADRG4 Applications
There are a lot of Texas Instruments TPS2048ADRG4 Power Switches ICs applications.
- USB Protection
- Low Voltage I/O System Power
- Storage Drives
- Solid State Drivers
- Portable/Handheld Devices
- Handheld Devices
- Wearable Devices
- Smart Phones, Feature Phones
- Portable GPS
- HDD and SSD
