TPS2049DRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 400mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 585.82mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS2049 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 100mA |
| Nominal Supply Current | 43μA |
| Output Configuration | High Side |
| Power Dissipation | 585.82mW |
| Output Current | 0A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.07mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 400m Ω |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2049DRG4 Overview
A Tape & Reel (TR) is used to package it.Package 8-SOIC (0.154, 3.90mm Width) contains it.The lighting driver has the mounting type Surface Mount.It owns the General Purpose switch type.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.The lighting driver has a total of 1 outputs that are available for use.In order to operate, it requires a voltage supply of Not Required.Voltage output is N-Channel volts at maximum.It has a total of Status Flag features.The TPS2049 family consists of this type.It contains 8 terminations.The 8 pins are used for the operation of the system.The LED driving board has a total of 1 functions.In this case, the LED driving board can produce only 100mAV as its maximum output.It is possible to obtain high efficiency with a supply voltage of 5V.As a result, it has a total of 8 pins.Lighting drivers with 400mOhm resistance are used.The output current is set to 0A in this case.Self-contained in an econtainer with a capacity of Power Management Circuits, this LED driver is self-contained.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.In total, 1 channels are available.It has a maximum input voltage of 5.5V volts.It has a 2.7V volt minimum input voltage.The maximum supply current for the LED driver is 0.07mA when it is operating.
TPS2049DRG4 Features
Supplied from 5V
Resistance of 400mOhm
1 channels
TPS2049DRG4 Applications
There are a lot of Texas Instruments TPS2049DRG4 Power Switches ICs applications.
- Mobile Communication Devices
- PC Card Hot Swap
- Storage Drives
- Solid State Drivers
- PC Cards
- Portable GPS
- Portable Video Game Players
- USB Ports/Hubs
- Low Voltage I/O System Power
- Gaming
