TPS2051BD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Max Power Dissipation | 585.82mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2051 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Output Type | N-Channel |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.07mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2051BD Overview
It is packaged in the form of a Tube.There is a 8-SOIC (0.154, 3.90mm Width) package that includes it.A Surface Mount mounting is used for the LED driving board.There is a General Purpose switch type associated with it.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.The LED driver is equipped with 1 outputs.A voltage of Not Required is used to power it.There is a maximum output voltage of N-Channel volts.In terms of features, the LED driving board has Status Flag.I believe it belongs to the TPS2051 family.A total of 8 terminations can be found in it.In order to operate, 8 pins are used.Currently, the lighting driver has a total of 1 functions.Using a voltage of 3.3V allows for high efficiency.A total of 8 pins are included in this LED driver.In this LED driving board, there is 70mOhm resistance.When this case is used, the output current is set to 500mA.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 2 channels to choose from.As far as input voltage goes, its maximum is 5.5V volts.A minimum input voltage of 2.7V volts is required for this LED driver.As a result of using this lighting driver, UNDERVOLTAGE LOCKOUT can also be produced.It has a maximum supply current of 0.07mA.
TPS2051BD Features
Supplied from 3.3V
Resistance of 70mOhm
2 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2051BD Applications
There are a lot of Texas Instruments TPS2051BD Power Switches ICs applications.
- Solid State Drivers
- PC Cards
- Portable GPS Device
- USB Ports/Hubs
- Telecom and Network Systems
- Hot-Swap Systems
- Portable GPS
- Wearable Devices
- Hot Swaps
- USB Power Distribution
