TPS2051BDBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 95mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Max Power Dissipation | 285mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2051 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.07mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 95m Ω |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2051BDBVT Overview
It is packaged in the manner of a Tape & Reel (TR).In the SC-74A, SOT-753 package, it is included.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the switch type it owns.It is recommended to set the temperature to -40°C~125°C TJ in order to ensure reliable operation.The LED driver has a total of 1 outputs.The LED driving board operates at Not Required volts.A maximum voltage of N-Channel volts is available from the output of this LED driver.There are Status Flag features available on the LED driving board.It belongs to the family TPS2051.A total of 5 terminations have been found in it.It is necessary to use the 5 pins in order to operate the LED driver.It is important to note that the LED driving board has 1 functions.Its maximum output voltage is 500mAV.High efficiency is possible when the supply voltage is set to 3.3V.It is mounted in the way of Surface Mount.5 pins are equipped with it.The LED driver has 95mOhm resistance.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.We offer 1 channels in total.This LED driver can handle voltages up to 5.5V volts.As a minimum input voltage, it requires 2.7V volts.The LED driver can also be used to produce UNDERVOLTAGE LOCKOUT.In order to operate, it requires at most 0.07mA amps of supply current.
TPS2051BDBVT Features
Supplied from 3.3V
Resistance of 95mOhm
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2051BDBVT Applications
There are a lot of Texas Instruments TPS2051BDBVT Power Switches ICs applications.
- Portable/Handheld Devices
- Smartphone and PDA
- Solid State Drivers
- Gaming
- Wireless Modem Data Cards
- Storage Drives
- Mobile Communication Devices
- USB Power Distribution
- Hot-Swap Systems
- Hot Swaps
