TPS2051BDBVTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Max Power Dissipation | 285mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2051 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 500mA |
| Nominal Supply Current | 1μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.07mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 95m Ω |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2051BDBVTG4 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).The SC-74A, SOT-753 package includes it.Mounting type Surface Mount is selected for the LED driving board.The switch type is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.The lighting driver is equipped with 1 outputs that can be used.With a supply voltage of Not Required, the LED driving board operates.It has a maximum output voltage of N-Channel volts.Features of the lighting driver are Status Flag.It is part of the TPS2051 family of LED drivers.The termination count is 5.For operation, we use the 5 pins.It has 1 functions.This lighting driver is capable of delivering a maximum output of 500mA volts.It is possible to obtain high efficiency with a supply voltage of 3.3V.This lighting driver is mounted in the way of Surface Mount.This LED driver is equipped with a total of 5 pins.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels to choose from.A maximum input voltage of 5.5V volts can be applied to it.There is a minimum input voltage of 2.7V volts.In addition, UNDERVOLTAGE LOCKOUT can be produced using this LED driving board.In order to operate at its maximum capacity, the supply current must not exceed 0.07mA.
TPS2051BDBVTG4 Features
Supplied from 3.3V
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2051BDBVTG4 Applications
There are a lot of Texas Instruments TPS2051BDBVTG4 Power Switches ICs applications.
- Handheld Devices
- Portable GPS Device
- Hot Swap
- Hot Swap
- Mobile Communication Devices
- USB Protection
- USB Power Distribution
- Notebook PC
- Storage (HDDs, SSDs)
- Smart Phones, Feature Phones
