banner_page

TPS2051BDG4

N-Channel PMIC TPS2051 8 Pin 3.3V 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS2051BDG4
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 900
  • Description: N-Channel PMIC TPS2051 8 Pin 3.3V 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Weight 72.603129mg
Operating Temperature -40°C~125°C TJ
Packaging Tube
JESD-609 Code e4
Feature Status Flag
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature UNDERVOLTAGE LOCKOUT
Max Power Dissipation 585.82mW
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Base Part Number TPS2051
Pin Count 8
Number of Outputs 1
Output Type N-Channel
Number of Channels 1
Interface On/Off
Analog IC - Other Type POWER SUPPLY SUPPORT CIRCUIT
Current - Output (Max) 500mA
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Adjustable Threshold NO
Input Type Non-Inverting
Switch Type General Purpose
Min Input Voltage 2.7V
Max Input Voltage 5.5V
Supply Current-Max (Isup) 0.07mA
Nominal Input Voltage 5.5V
Ratio - Input:Output 1:1
Voltage - Load 2.7V~5.5V
Fault Protection Current Limiting (Fixed), Over Temperature, UVLO
Rds On (Typ) 70m Ω
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS2051BDG4 Overview


The LED driver's packaged as a Tube.The 8-SOIC (0.154, 3.90mm Width) package includes it.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the switch type it owns.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.The lighting driver is equipped with 1 outputs that can be used.Operation is based on a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.As far as features are concerned, the LED driving board has Status Flag.There is a TPS2051 family of things that it belongs to.It consists of 8 terminations in total.The 8 pins are used to operate the LED driver.It has 1 functions.This LED driver has a maximum output of 500mAV.With a supply voltage of 3.3V, high efficiency is possible.Surface Mount is mounted in the way.In total, it has 8 pins.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels to choose from.This LED driving board can accept voltages up to 5.5V volts as an input.A voltage of 2.7V volts is the minimum input voltage.Using this LED driver, it is also possible to produce UNDERVOLTAGE LOCKOUT.In order to operate at its maximum capacity, the supply current must not exceed 0.07mA.

TPS2051BDG4 Features


Supplied from 3.3V
1 channels
Additional features like UNDERVOLTAGE LOCKOUT

TPS2051BDG4 Applications


There are a lot of Texas Instruments TPS2051BDG4 Power Switches ICs applications.

  • HDD and SSD
  • Wearable Devices
  • Handheld Devices
  • Wireless Headsets
  • Mobile Communication Devices
  • Portable GPS Device
  • Wireless Modem Data Cards
  • Gaming
  • Hot-Swap Systems
  • Portable/Handheld Devices

Write a review

Note: HTML is not translated!
    Bad           Good