TPS2051BDRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2051 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.07mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2051BDRG4 Overview
It is packaged in the form of a Tape & Reel (TR).This package is included in 8-SOIC (0.154, 3.90mm Width).Surface Mount is the mounting type of the LED driver.The switch type is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.The LED driver has a total of 1 outputs.Operation is based on Not Required supply voltage.The maximum output voltage of this LED driver is N-Channel volts.There are Status Flag features available on the LED driving board.It belongs to the TPS2051 family.A total of 8 terminations can be found in it.8 pins are used for operation.Currently, the lighting driver has a total of 1 functions.The lighting driver's maximum output is 500mAV.It is possible to obtain high efficiency with a supply voltage of 3.3V.A total of 8 pins are present on it.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.We currently have 1 channels available.The maximum input voltage of the LED driver is 5.5V volts.There is a minimum input voltage of 2.7V volts for this LED driver.The LED driver can also be used to produce UNDERVOLTAGE LOCKOUT.In order to operate at its maximum capacity, the supply current must not exceed 0.07mA.
TPS2051BDRG4 Features
Supplied from 3.3V
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2051BDRG4 Applications
There are a lot of Texas Instruments TPS2051BDRG4 Power Switches ICs applications.
- USB Power Distribution
- Portable GPS Device
- Gaming
- USB Power Distribution
- Hard Disk Drives
- Smartphone and PDA
- Various applications equipped with buttons
- PDAs
- PC Cards
- Hot Swap
