TPS2051CDBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 97mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS2051 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 90μA |
| Current | 500mA |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 97m Ω |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2051CDBVT Overview
It is packaged in the manner of a Tape & Reel (TR).It is included with the SC-74A, SOT-753 package as well.The lighting driver is mounted in the Surface Mount position.It owns the USB Switch switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.The LED driver has a total of 1 outputs.The LED driving board operates at Not Required volts.The maximum output voltage is N-Channel volts.Currently, the LED driving board is equipped with Load Discharge, Status Flag features.It comes under the family of TPS2051.It contains 5 terminations.During operation, the 5 pins are used.Currently, the lighting driver has a total of 1 functions.It is necessary to reduce the maximum output current to 500mA to meet the operation criteria.As long as the supply voltage is 5V, high efficiency can be achieved.The lighting driver is mounted in the way of Surface Mount.5 pins are equipped with it.97mOhm is the resistance of the lighting driver.As a result, the output current is set to 500mA.This gadget uses an analog IC, which is ANALOG CIRCUIT in this case.
TPS2051CDBVT Features
Supplied from 5V
Resistance of 97mOhm
TPS2051CDBVT Applications
There are a lot of Texas Instruments TPS2051CDBVT Power Switches ICs applications.
- Smartphone and PDA
- Set-top-box
- Portable Devices
- Hot-Swap Systems
- Hot Swap
- PDAs
- Solid State Drivers
- Telecom and Network Systems
- Set-Top Boxes
- USB Power Distribution
