TPS2051D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 150mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS2051 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 500mA |
| Output Configuration | High Side |
| Power Dissipation | 725mW |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 ms |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 40 ms |
| Continuous Drain Current (ID) | 500mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Drain to Source Resistance | 135mOhm |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2051D Overview
It is packaged in the form of a Tube.It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.This lighting drivere has a mounting type of Surface Mount.The switch type of this switch is General Purpose.Keeping the temperature at -40°C~125°C TJ ensures reliable operation.As a default, the output is set to 1.The LED driving board operates with a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.There are Status Flag features available on the LED driving board.It belongs to the family TPS2051.It contains 8 terminations.For operation, we use the 8 pins.It consists of 1 functions.To meet the operation criteria, the maximum output current drops to 500mA.It is possible to achieve a high level of efficiency with a supply voltage of 5V.The LED driving board is mounted in the way of Surface Mount.8 pins are connected to it in total.It has 150mOhm resistance.The maximum supply voltage is set to 5.5V.For normal operation, the supply voltage (Vsup) must be kept above 2.7V.In this LED driving board, the analog IC ANALOG CIRCUIT is employed.
TPS2051D Features
Supplied from 5V
Resistance of 150mOhm
TPS2051D Applications
There are a lot of Texas Instruments TPS2051D Power Switches ICs applications.
- PC Cards
- Hot Swap
- Wireless Modem Data Cards
- Portable GPS Device
- Wireless Headsets
- Portable/Handheld Devices
- Wearable Devices
- Telecom and Network Systems
- Low Voltage I/O System Power
- Storage (HDDs, SSDs)
