banner_page

TPS2051DG4

N-Channel PMIC TPS2051 8 Pin 5V 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS2051DG4
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 135
  • Description: N-Channel PMIC TPS2051 8 Pin 5V 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Weight 72.603129mg
Operating Temperature -40°C~125°C TJ
Packaging Tube
JESD-609 Code e4
Feature Status Flag
Part Status Not For New Designs
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number TPS2051
Pin Count 8
Number of Outputs 1
Output Type N-Channel
Supply Voltage-Max (Vsup) 5.5V
Supply Voltage-Min (Vsup) 2.7V
Interface On/Off
Analog IC - Other Type ANALOG CIRCUIT
Current - Output (Max) 500mA
Nominal Supply Current 10μA
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Ratio - Input:Output 1:1
Voltage - Load 2.7V~5.5V
Fault Protection Current Limiting (Fixed), Over Temperature, UVLO
Rds On (Typ) 80m Ω
Length 4.9mm
Width 3.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS2051DG4 Overview


It's?packaged?in?the way?of?a?Tube.The 8-SOIC (0.154, 3.90mm Width) package contains it.A Surface Mount mounting is used for the LED driving board.General Purpose is the switch type that it owns.Ensure reliable operation by setting the temperature to -40°C~125°C TJ.The LED driver has 1 outputs.In order to operate, it requires a voltage supply of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.It is equipped with Status Flag features.As you can see, it comes from the TPS2051 family.It has a total of 8 terminations.It is necessary to use the 8 pins in order to operate the LED driver.It contains 1 functions.In terms of output, the lighting driver can provide a maximum of 500mA V.High efficiency is possible when the supply voltage is set to 5V.It is positioned in the direction of Surface Mount.A total of 8 pins are present on it.A maximum supply voltage of 5.5V is set in Vsup.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 2.7V.In this case, a digital IC is used, which is ANALOG CIRCUIT.

TPS2051DG4 Features


Supplied from 5V

TPS2051DG4 Applications


There are a lot of Texas Instruments TPS2051DG4 Power Switches ICs applications.

  • Hot Swap
  • Hot-Swap Systems
  • Hot Swap
  • Portable Devices
  • PDAs
  • USB Protection
  • PC Cards
  • Storage Drives
  • Notebook and Tablet Computers
  • Smart Phones, Feature Phones

Write a review

Note: HTML is not translated!
    Bad           Good