TPS2051P
| Parameters | |
|---|---|
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 1.18W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Continuous Drain Current (ID) | 500mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Drain to Source Resistance | 135mOhm |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TPS2051 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
TPS2051P Overview
A Tube is used to package it.It is included with the 8-DIP (0.300, 7.62mm) package as well.The lighting driver is mounted in the Through Hole position.General Purpose is the switch type that it owns.It is recommended that the temperature be set to -40°C~125°C TJ for reliable operation.The LED driver has a total of 1 outputs.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts can be obtained with this LED driver.Features of the lighting driver are Status Flag.There is a TPS2051 family of things that it belongs to.The termination count is 8.The operation is performed through the 8 pins.There are 1 functions of the LED driver.It is possible to achieve a high level of efficiency with a supply voltage of 5V.In this case, it is mounted in the way of Through Hole.As a result, it has a total of 8 pins.The LED driver is configured with a maximum supply voltage of 5.5V (Vsup).Normal operation requires a voltage above 2.7V for the supply voltage.This LED driving board uses an analog IC ANALOG CIRCUIT.
TPS2051P Features
Supplied from 5V
TPS2051P Applications
There are a lot of Texas Instruments TPS2051P Power Switches ICs applications.
- PC Cards
- Wireless Modem Data Cards
- Set-Top Boxes
- Portable Devices
- Notebook PC
- Portable Video Game Players
- Hot Swap
- Hot-Swap Systems
- Wearable Devices
- Smartphone and PDA
