TPS2052BDGNG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Max Power Dissipation | 1.7123W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2052 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2052BDGNG4 Overview
As a result, it is packaged in the form of a Tube.The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package contains it.It has been mounted as Surface Mount on the LED driver.It owns General Purpose switch type.It is recommended that the temperature be set to -40°C~125°C TJ for reliable operation.The lighting driver has a total of 2 outputs that are available for use.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.Currently, the LED driving board is equipped with Status Flag features.I believe it belongs to the TPS2052 family.The termination count is 8.The operation is carried out using the 8 pins.It has 1 functions.In terms of output, the lighting driver can provide a maximum of 500mA V.The supply voltage can be 3.3V for high efficiency.As a result, it is mounted in the manner of Surface Mount.The LED driving board is equipped with a total of 8 pins.In this LED driving board, the analog IC POWER SUPPLY SUPPORT CIRCUIT is employed.You can select from 2 channels.This LED driving board can accept voltages up to 5.5V volts as an input.As a minimum input voltage, it requires 2.7V volts.By using this lighting driver, it is also possible to produce UNDERVOLTAGE LOCKOUT.Its maximum supply current for operation is 0.09mA.
TPS2052BDGNG4 Features
Supplied from 3.3V
2 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2052BDGNG4 Applications
There are a lot of Texas Instruments TPS2052BDGNG4 Power Switches ICs applications.
- Solid-State Drives
- Portable Video Game Players
- Portable Music Players
- Wireless Modem Data Cards
- Handheld Devices
- Hot Swaps
- Hard Disk Drives
- PC Cards
- USB Power Distribution
- Notebook PC
