TPS2052BDGNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2052 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2052BDGNR Overview
The LED driver's packaged as a Tape & Reel (TR).This package is included in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.This LED driving board is mounted using the mounting type Surface Mount.This switch is of type General Purpose.To ensure reliable operation, set the temperature to -40°C~125°C TJ.There is a default setting of 2 for output.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.A lighting driver with Status Flag features is available.There is a TPS2052 family of things that it belongs to.There are 8 terminations in it.8 pins are used for operation.As far as the lighting driver is concerned, there are 1 functions.It is necessary to reduce the maximum output current to 500mA to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.The lighting driver is mounted in the direction of Surface Mount.A total of 8 pins are present on it.A self-contained LED driver with a capacity of Power Management Circuits is contained in an econtainer.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.A total of 2 channels are available for you to choose from.3/5V is the power supply of the part.As a result of using this lighting driver, UNDERVOLTAGE LOCKOUT can also be produced.It operates at a maximum supply current of 0.09mA.
TPS2052BDGNR Features
Supplied from 3.3V
2 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2052BDGNR Applications
There are a lot of Texas Instruments TPS2052BDGNR Power Switches ICs applications.
- Set-Top Boxes
- Wearable Devices
- Hot Swap
- HDD, SSD
- Solid State Drivers
- Various applications equipped with buttons
- Wireless Modem Data Cards
- PC Cards
- Hot Swap
- USB Power Distribution
