Parameters | |
---|---|
Factory Lead Time | 1 Week |
Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
Mounting Type | Surface Mount |
Package / Case | 8-SOIC (0.154, 3.90mm Width) |
Surface Mount | YES |
Number of Pins | 8 |
Weight | 72.603129mg |
Operating Temperature | -40°C~125°C TJ |
Packaging | Tape & Reel (TR) |
JESD-609 Code | e4 |
Feature | Status Flag |
Pbfree Code | yes |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Number of Terminations | 8 |
ECCN Code | EAR99 |
Resistance | 70mOhm |
Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature | UNDERVOLTAGE LOCKOUT |
Subcategory | Power Management Circuits |
Max Power Dissipation | 585.82mW |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Number of Functions | 1 |
Supply Voltage | 3.3V |
Base Part Number | TPS2052 |
Pin Count | 8 |
Number of Outputs | 2 |
Output Type | N-Channel |
Power Supplies | 3/5V |
Number of Channels | 2 |
Interface | On/Off |
Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
Current - Output (Max) | 500mA |
Output Configuration | High Side |
Voltage - Supply (Vcc/Vdd) | Not Required |
Adjustable Threshold | NO |
Input Type | Non-Inverting |
Switch Type | General Purpose |
Min Input Voltage | 2.7V |
Max Input Voltage | 5.5V |
Supply Current-Max (Isup) | 0.09mA |
Nominal Input Voltage | 5.5V |
Ratio - Input:Output | 1:2 |
Voltage - Load | 2.7V~5.5V |
Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
Rds On (Typ) | 70m Ω |
Height | 1.75mm |
Length | 4.9mm |
Width | 3.91mm |
Thickness | 1.58mm |
Radiation Hardening | No |
REACH SVHC | No SVHC |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |
The TPS2052BDR power-distribution switches are designed for applications that are likely to meet heavy capacitive loads and short circuits. For power-distribution systems that require several power switches in a single package, these devices include 70-m N-channel MOSFET power switches. A logic enable input is used to control each switch. An internal charge pump provides gate drive, controlling power-switch rise and fall times to reduce current surges while switching.
?MOSFET with a high-side capacitance of 70 mQ
?Continuous Current of 500 mA
?Short-Circuit and Thermal Protection
?Exact Current Limit (0.75 A min, 1.25 A max)
?Operating Voltage: 2.7 to 5.5 Volts
?Typical Rise Time: 0.6 ms
?Undervoltage Lockout (Undervoltage Lockout)
?Fault Report That Has Been Deglitched (OC)
?Capacitive Loads with a High Capacity
?Protection Against Short-Circuits