TPS2052BDRBT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Power Rating | 1.6W |
| Max Power Dissipation | 1.6W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2052 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Number of Channels | 2 |
| Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 50μA |
| Current | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 3 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 10 ms |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2052BDRBT Overview
It is package in Tape & Reel (TR) case.There is a 8-VDFN Exposed Pad package that includes it.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the type of switch owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.It is possible to use 2 outputs in the lighting driver.The LED driving board operates at Not Required volts.Voltage output is N-Channel volts at maximum.It has a total of Status Flag features.It is a member of the TPS2052 family.A total of 8 terminations have been found in it.The 8 pins are used to operate the LED driver.The LED driving board has a total of 1 functions.With a supply voltage of 3.3V, high efficiency is possible.A total of 8 pins are present on it.70mOhm is the resistance of the lighting driver.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.We offer 2 channels in total.The maximum input voltage is 5.5V volts.As a minimum input voltage, it requires 2.7V volts.In addition, UNDERVOLTAGE LOCKOUT can be produced using this LED driving board.
TPS2052BDRBT Features
Supplied from 3.3V
Resistance of 70mOhm
2 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2052BDRBT Applications
There are a lot of Texas Instruments TPS2052BDRBT Power Switches ICs applications.
- Mobile Communication Devices
- Set-Top Boxes
- Hot Swap
- Smartphone and PDA
- HDD, SSD
- Hot Swap
- Wireless Headsets
- Low Voltage I/O System Power
- Gaming
- USB Power Distribution
