TPS2052BDRG4
| Parameters | |
|---|---|
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2052 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
TPS2052BDRG4 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It's included in the 8-SOIC (0.154, 3.90mm Width) package.This LED driving board is mounted using the mounting type Surface Mount.There is a General Purpose switch type associated with it.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.In this LED driver, there are no outputs available.With a supply voltage of Not Required, the LED driving board operates.It has a maximum output voltage of N-Channel volts.There are Status Flag features available on the LED driving board.It belongs to the TPS2052 family.There are 8 terminations in it.For operation, 8 pins are used.The LED driver has 1 functions.With a supply voltage of 3.3V, high efficiency is possible.8 pins are connected to it in total.Currently, the LED driving board has 70mOhm resistance.This case has the output current set to 500mA.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.In total, there are 2 channels available.This LED driving board can accept voltages up to 5.5V volts as an input.It has a 2.7V volt minimum input voltage.This LED driver can also produce UNDERVOLTAGE LOCKOUT.It has a maximum supply current of 0.09mA.
TPS2052BDRG4 Features
Supplied from 3.3V
Resistance of 70mOhm
2 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2052BDRG4 Applications
There are a lot of Texas Instruments TPS2052BDRG4 Power Switches ICs applications.
- Portable GPS Device
- Hard Disk Drives
- USB Power Distribution
- Gaming
- Various applications equipped with buttons
- USB Ports/Hubs
- Wireless/Networking Cards
- Notebook PC
- Hot Swap
- Smartphone and PDA
