TPS2052DG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS2052 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2052DG4 Overview
The package is in the form of a Tube.In the 8-SOIC (0.154, 3.90mm Width) package, it is included.This LED driving board is mounted using the mounting type Surface Mount.It owns General Purpose switch type.To ensure reliable operation, set the temperature to -40°C~125°C TJ.The lighting driver is equipped with 2 outputs that can be used.Operation is based on a supply voltage of Not Required.Voltage output is N-Channel volts at maximum.The lighting driver has Status Flag features.I believe it belongs to the TPS2052 family.It contains 8 terminations.In order to operate, 8 pins are used.It is important to note that the LED driving board has 1 functions.In terms of output, the lighting driver can provide a maximum of 500mA V.It is possible to obtain high efficiency with a supply voltage of 5V.It is mounted in the way of Surface Mount.A total of 8 pins are included in this LED driver.In this case, Vsup (maximum supply voltage) is set to 5.5V.In this case, the analog IC is ANALOG CIRCUIT.
TPS2052DG4 Features
Supplied from 5V
TPS2052DG4 Applications
There are a lot of Texas Instruments TPS2052DG4 Power Switches ICs applications.
- Handheld Devices
- HDD, SSD
- Wearable Devices
- Hot-Swap Systems
- HDD and SSD
- Portable/Handheld Devices
- Wireless Modem Data Cards
- Mobile Communication Devices
- USB Ports/Hubs
- Low Voltage I/O System Power
