TPS2052DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 23 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS2052 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 725mW |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Continuous Drain Current (ID) | 500mA |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Drain to Source Resistance | 135mOhm |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2052DR Overview
It is packaged in the manner of a Tape & Reel (TR).The 8-SOIC (0.154, 3.90mm Width) package contains it.This LED driving board is mounted using the mounting type Surface Mount.It owns General Purpose switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.The LED driver has a total of 2 outputs.With a supply voltage of Not Required, the LED driving board operates.There is a maximum output voltage of N-Channel volts on this LED driver.This LED driving board is equipped with Status Flag features in order for it to be useful.It belongs to the family TPS2052.It has a total of 8 terminations.The 8 pins are used for the operation of the system.It has 1 functions.It is necessary to reduce the maximum output current to 500mA to meet the operation criteria.The supply voltage can be 5V for high efficiency.Surface Mount is mounted in the way of this LED driving board.A total of 8 pins are included in this LED driver.The LED driver is configured with a maximum supply voltage of 5.5V (Vsup).There is an analog input IC in this gadget, which is ANALOG CIRCUIT.
TPS2052DR Features
Supplied from 5V
TPS2052DR Applications
There are a lot of Texas Instruments TPS2052DR Power Switches ICs applications.
- Smart Phones, Feature Phones
- Set-top-box
- Hot-Swap Systems
- Storage (HDDs, SSDs)
- Wireless Modem Data Cards
- Handheld Devices
- USB3.1 Power Delivery
- Telecom and Network Systems
- Hot Swap
- PDAs
